Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, male 052, type A, crimp, class S. Product standard

Possible extra thermo-mechanical forces due to high current loads from renewable sources of power generation are not covered by these tests (under consideration)

and dimensions of magnetic tracks according to tape carrier

BS EN 10328 provides the principle which helps you in determining the depth of hardening from the profile of hardness from a cross-section normal to the surface

BS 1804-1 gives the range of diameters and lengths in which the various grades of dowel pins shall be available

performance is assessed under laboratory conditions which may not adequately simulate conditions actually experienced in personal dosimetry

a rated current not exceeding 125 A and a rated short-circuit capacity not exceeding 25 000 A

Why should you use BS 5925 - Ventilation principles and designing for natural ventilation

DD IEC/TS 62306 specifically relates to the test objects which contain an embedded thermal sensor (such as a thermocouple or thermistor) although some parts may also be relevant to an alternative method of temperature determination

when carrying out a biological safety assessment

oxide-ceramic and plastic coatings

Since they are an important component of power tools and machine tools their installation and design need to be free from defects and deviations

PAS 170-1 is for use by manufacturers