5/16" Tubing 40 Inches Long With 90 Deg Bend One End 1/2-20 Fittings Each End OE SteelInline Tube's pre fabricated tubing comes with 45 degree double flares on each end and is available in various lengths and fittings. This is our standard OE steel tubing with a . 028 wall thickness. This pre fabricated tube has a 90 degree bend on one end and is 40 in total length, including the 5 16 tube and 12 20 fittings. Bending, flaring, and straightening tools can be found in the related products section below or by choosing the appropriate

Right rear cable 1pc

Pontiac Sunbird Astre Rear Parking Brake Cable 1pc

It has 3/8" tube with 5/8"-18 thread

1971-76 Buick Electra LeSabre Front Parking Brake Cable

Caliper brackets

Screws and Stops 18pc

1973-77 Pontiac GTO/Grand Am Offset/Center 21" Muffler Body 2-1/4" Inlet

This preformed brake line(s) will replace the line(s) from the master cylinder to the valve or ABS module in your vehicle

1970-72 Oldsmobile 442/W-30 Fan Clutch OR Stamp 1pc

1960 Pontiac Catalina Ventura Rear Parking Brake Cable Bolt On

and a carrying case

·         Caliper brackets and backing plates