120 1-NO107-5PK - RENOLD 1 1/2 Inch Pitch Premier Standard LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

Shell Advance's R

NJ22 20 EC P Two Flanges On Outer Ring

Light 45mm - Bore Size Open Type Internal Clearance Greater Than Normal

This S7005CEGB/P4A bearing is a Super Precision angular contact bearing with 2 rubber seals

The design of the NJ311ECM/C3 SKF bearing ensures even load distribution and carries heavy radial loads while maintaining a low cross-sectional height and low friction

23 06 c3 Extra Wide Bore Size - 30mm Radial Internal Clearance Greater than Normal

NUP 3 13 E T Metric

This GE120FO bearing is a metric steel/steel open type spherical plain bearing with a standard radial internal clearance

This 7016CD/P4ADGB bearing is a Super Precision angular contact bearing with a 15° contact angle and a high capacity design

The dimensions of the SKF NU207ECP bearing are 35x72x17mm

CR 16 V R Inch Series Size High Carbon Steel Full Complement Type Model Code Shield Type Crowned Outer Ring

This LWH35C3R1200T1HS2 is a high rigidity ball type series linear way with a rail length of 1200mm