SPL Parts 2013+ Subaru BRZ/Toyota 86 Solid Subframe BushingsFRS BRZ solid aluminum subframe bushings replace the stock mushy rubber bushings on your Scion FR S and Subaru BRZ to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing around" under drivetrain torque or suspension load, maintaining optimum suspension geometry and reducing wheel hop. Our slide in shim system allows you to quickly raise or lower the subframe to fine tune the roll center anti squat

speed and control with an easy to read

Black Bezel

The mass airflow sensor is not required

Sold as complete set for one car

A 33% overall increase in the gauge face display makes it easier to see at a glance

Injectors – The Link G4X plug in is NOT designed to be used with low impedance injectors

* Independently tested at 360° Product Testing (results reported on August 31st

FORD SPECIFIC FEATURES:

Two buttons on the faceplate deliver programmability for peak/recall

This “heat soak” along with the ECU’s sensitive safety protocols reduces engine power by compensating with lower boost levels and retarded timing

The stock eccentric bolts provided by Nissan for small camber/toe adjustments tend to slip under high cornering loads

This is suitable for up to 300kpa (44psi) boost