Relay DC 5V 7ASPDT(Single Pole Double Throw) relay is used as a switch for high current AC DC appliances which need to be controlled from a microcontroller or sensor output. 5V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 7A connected to it. The coil resistance of this relay is 70 ohm whereas the coil current is 70mA. The trigger voltage for this relay is 5V. There are 5 pins in this relay i. e, Coil end 1, Coil end 2, COM(common),

0V-24V Power Rating 400W Quiescent Current 15mA Working Temperature -40°C to 85°C Adjustable Time 0

3 V to 700 V DRAIN Peak Current 5

6mm Diameter 18

Setting the lower limit of the thermostat parameter P3

Input Voltage 5 V SPI Flash Default 32 Mbit RAM 520 KB SRAM + 4 MB PSRAM Bluetooth Bluetooth 4

Vgs th - Gate-Source Threshold Voltage

These are Carbon Film Resistor with a value of 12k ohm 1/4W and tolerance of ±5%

DC voltage (V) 200mV/2V/20V/200V/600V ±(0

Connector Type JST-XH Pitch 2 mm  Length of Wire 25 cm  Number of Pins 3

transparency

Sensor Range 5mm  Types of Modes Fast Mode

It's a YAGEO 22nf/0