80 3-NO58-10PK - RENOLD 1 Inch Pitch Premier Standard LinkThe standard connecting link for ANSI series detachable chains, also used on riveted chains where high speeds or arduous conditions are encountered. Supplied with two connecting pins riveted into the outer plate, the other outer plate being a press fit onto the pins and secured by split pins after assembly. Press fit connecting links can only be used once; new links must always be used to replace dismantled links.

The bearing's dimensions are 90x155x39

NJ 3 06 E M1 C3 Two Flanges on Outer Ring and One on Inner Ring Medium Series 30mm - Bore Size Increased Capacity Design Solid Brass Cage

This LWHDG30C3R800T1HS2 is a high rigidity ball type series linear way with a rail length of 800mm

This 27687/27620 bearing is an imperial taper roller bearing

The bearing's dimensions are 40x110x92

11/16 FM YET209-111 Y-Bearings Plummer Block Unit

NJ23 10 EC P Two Flanges On Outer Ring

LWHTG30 C1 R2000 T1 H S2 Non-Maintenance Free Long Flange Type Top Mounting Linear Way Unit One Carriage 2000mm - Rail Length Light Preload High Accuracy Class S2 Specification

NU 10 28 M1A C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Extra Light Series 140mm - Bore Size Solid Brass Cage

Medium 20mm - Bore Size Contact Angle 40° Contact Angle Extra Capacity Polyamide 46 Cage Universal Mounting

This LJ140 R&M bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 140x250x42

LWLC7 C3 R240 T1 H S2 Non-Maintenance Free Short Stainless Steel Miniature Linear Way unit Three Carriages 240mm - Rail length Light Preload High Accuracy Class S2 Specification