Mini RJM Dual FootswitchThis pedal is a dual momentary footswitch for RJM switching systems. The pedal's LEDs are powered via the cable connection from the RJM switcher. You will need a stereo 1 4" TRS cable to connect the pedal to the switcher. The pedal is built with: Aluminium enclosure Neutrik plug socket Soft touch footswitches Point to point wiring LEDs Enclosure dimensions: 92x38x31mm

Your preamp effect pedals go into the AB pedal’s input which is routed to the Amp Input A or B sockets

Here we have a remote quad true bypass looper pedal in an unpainted enclosure with the same footprint of a standard MXR pedal

due to the spacing of the switches you can also do both with one stomp

great for wet/dry setups where you are having phasing issues

SPST heavy duty soft touch footswitches

I can use a stereo socket and wire it the ring if needed

167x40x30mm

TimeLine and Volante

A socket will be added to the rear of the looper with a toggle switch to let you set the correct polarity for the status LED

plus an extra gang of sockets for a footswitch

Enclosure dimensions:

Please note this option is not possible with soft touch footswitches