Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems1 Scope This British Standard specifies the requirements for cast irondrain systems for use in buried applications or suspended within a basement, in areas not subject to fire regulations, where any pressure likely to occur is a maximum of 3. 5 bar. NOTE In this standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar). The nominal sizes of the drain systems are DN 100, DN 150 and DN 225 inclusive. The standard specifies the

Those using the arterial stent standard EN 14299:2004 should be aware that it will no longer give presumption of conformity to the Medical Devices Directive as of 21 March 2010

Annex D (informative) Documentation

carried out in accordance with coating or product specifications

This European Standard specifies a method for the determination of the length

for which the main requirement is their resistance to the effects of hot gases and products of combustion at temperatures above 550 degrees C

or samples containing undissolved or volatile materials or substances which react with the nutrient solution

BS IEC 61334-3-1 specifies disturbance limits in the frequency range from 3 kHz up to 30 MHz

based on an international designation system

and environmental characteristics of cables

Cereals and cereal products manufacturers

BS ISO 17593 is an international standard for manufacturers of in vitro medical devices

It also assists them to keep in mind a clear methodology when considering these aspects and when checking possible interaction of the normative requirements with the environment