Coilover Suspension Stance - MTSGWBM03-S2 Front and rear axle height adjustable (threaded shock absorber housing)., 8 Not for 4x4., 21 If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 During the installation of suspension set the clearance between tire rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

unless some other method of noise pipe removal has already been employed such as as DIY plug solution or a replacement intercooler pipe that bypasses this connection altogether

and Veloster N

OEM Part Number: Bolt = 7703602319

at the rear of the engine bay

The band threads are pressed in (rather than perforated) which enhances the thread strength and presents a smooth and snag-free band surface to the hose

Steering Damper Bush - Pin End

The adaptor plate is installed between the boost (MAP) sensor and the intake manifold

3 x M6 x 16 Socket Cap Bolts

definitely does what it says on the tin

Ford Fiesta MK6 ST (30mm Oval Bracket)

Gains on mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on stage 1 mapped cars

The 048 actuators are those with a big body