Alpha HSS Tap MC Bottoming-16x2.5 MCHB180BOTTOMING taps have a lead of two threads and are used when tapping blind holes. Usually preceded by a taper or intermediate tap. Alpha bottoming taps can be identified by their plain shaft, they have no rings on the shaft near the driving square. Diameter: 18mm Pitch: 2. 5mm Overall length: 95mm Shaft Diameter: 14mm Drive Square: 11mm Tapping Drill Size: 15. 50mm Weight (gr) 126. 10

PFERD COMBICLICK polishing set for general use when performing all kinds of polishing work

Overall length: 75mm

Quick lock clips for quick and easy visor replacement

CRC Dry Glide with PTFE will penetrate and bond to metal

1000kg WLL - Color Violet –Length 6 Metres - Weight

Soft polyurethane for maximum comfort

2 Flute Straight Step Drill4-20mmFeatures:Drills & deburrs in one processIdeal for: Non-ferrous metals

It can be easily applied at temperatures from -0°F (-18°C) to 110°F (43°C)

Drive Square: 11mm

Drill Size (mm)    13

Diameter (mm) 83

000psi (828bar) • 450g capacity • Suitable for all grease grades up to NLGI3 • Twin Lock System seals the piston and eliminates the possibility of dummy lubrication • 4 jaw coupler & rigid extension • Coarse thread on barrel assembly eliminates the possibility of cross threading • Three way loading • High volume