1-1/4" x 8' Open and Open Spelter Socket Wire Rope SlingSpelter sockets can be found on guylines, raising lines, lifting bridles, and other wire ropes. These sockets are fixed to wire ropes for static applications, as well as lifting applications. This 1 1 4" by 8' Type 110 Spelter Socket sling has a working load limit of 15. 98 tons. The length of the assembly is measured from the center point of the pin with an open socket like this one. This wire rope socket sling has an open spelter socket on each end.

This Type 110 Spelter Socket has a 1-3/8" by 14' wire rope assembly with a closed spelter socket on each end

This sling measures 18' length bearing point to bearing point and features self-locking hook and foundry hook end fittings

the loose end has a twisted flat snap hook

but a bolt type shackle is a better choice for permanent or long-term pulling or lifting

raising lines

The 1/4" by 5' long wire rope sling has swage sockets fitted to each end

The 1/2" by 10' long wire rope sling has swage sockets fitted to each end

A 2" x 10' version of this tire strap is also available

a tag is attached to each sling displaying the various working load limits for angles

this replacement car carrier strap features two 90-degree angle swivel J-hooks - one fixed

This 1-1/4" by 16' Type 110 Spelter Socket sling has a working load limit of 15

This polyester cam buckle e-track strap is fitted with an additional spring-loaded fitting on the cam buckle end of the strap for added versatility