ARS Bump Rubber, RedHyper Racing # 38 006 This item number is for the red ARS Bump Rubber only. For the complete Bump Rubber Assembly, order part number 38 006. 5 8" Internal diameter hole. A bump rubber is used to keep the car from bottoming out and to add spring rate and therefore dynamic corner weight when the chassis travels far enough to get into the bump rubber. Generally bump rubbers are used on the left rear shock. It is used on winged racing in some situations

Maintains optimal damping performance by minimizing foaming and air entrainment

1-3/4" x 54" Fully Splined Rear Axle fits 600cc Sprints

drop it down to 10 PSI without worry of cavitation

- Body length: 3

This is the version designed to use a panhard bar

Hyper Racing # 34-6002

Hyper Racing recommends bladders for all forms of racing

Hyper Racing # 366-304

Hyper Racing # 12-184

Some older Hyper Chassis were originally equipped with Wilwood master cylinders

x 5/8" Spacer (1)

Hyper Racing # 146-940